16 Inch Sand Filter System (with 1 HP Matrix Pump)

$429.99

Hayward Pro-Series Sand Filters Deliver A Combination Of Efficiency And Amazing Water Clarity

Take a swim in clear, clean water every time you jump into your above ground pool with the Hayward Pro Series Sand Filter System. This unique above ground pool filter system combines innovation and power to ensure your pool water is in impeccable condition all the time. These systems are quick to assemble and engineered to provide the maximum amount of flow with the minimal amount of energy usage, reducing your operational costs while offering the best possible results.

Hayward is the number one name in the pool industry, and the Pro Series Sand Filter System for Above Ground Pools is no exception. You’ll notice superior water quality, extended filter cleaning cycles and no required backwashing. It’s simple to operate this fantastic filter system, it’s a great economic value and it’s crafted from ultra-strong, durable and reinforced thermos-plastic.

  • Best-in-class efficiency saves on operation and energy usage
  • Full flow technology ensures maximum flow rates and filtration
  • Requires very little maintenance and boasts a tough construction
  • Vari-Flo control valve features six options for selection of filter functionality
  • Weather and element-proof housing
  • Systems designed for fast assembly
  • Optional microprocessor pump timer is available

PUMP:

• The above-ground industry’s largest strainer basket for large debris collection with minimal maintenance.

• Horizontal/vertical discharge feature — simply converts from vertical to horizontal discharge orientation with the press of a button.

• Quick disconnect intake and discharge pipe connection.

• C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for hassle-free maintenance.

• Heavy-duty, high performance motor with integrated automatic thermal overload protector for years of operation.

• High quality Noryl® impeller with wide openings to prevent clogging by leaves and debris.

• Durable, corrosion-proof housing for years of dependable service and all-weather performance.

• Heat-resistant, double-sized seal for long-lasting efficiency .

• Energy-efficient, protected rear mounted switch.

• Integral drain plug for easy winterization of pump.

PUMP:

  • Motor Will NOT Start – Check For:

– Improper or loose wiring connections; open switches or relays; tripped circuit breakers, GFCI’s, or blown fuses.
– Manually check rotation of motor shaft for free movement and lack of obstruction.
– If you have a timer, be certain it is working properly. Bypass it if necessary.

  • Motor Shuts OFF – Check For:

– Undersized wiring; loose connections; etc.
– Low voltage at motor or power drop (frequently caused by undersized wiring or extension cord use).
– Mechanical binding and electrical overloads.
NOTE: Your Hayward pump motor is equipped with an “automatic thermal overload protector.” The motor will automatically shut off if power supply drops before heat damage can build up causing windings to burn out. The “thermal overload protector” will allow the motor to automatically restart once the motor has cooled, provided the power source is again up to proper levels. It will continue to cut On/Off until the problem is corrected. Be sure to correct cause of overheating.

  • Motor Hums, But Does NOT Start – Check For:

– Centrifugal switch stuck in OPEN position.
– Binding of motor shaft.

  • Pump Won’t Prime:

– Make sure pump/strainer housing is filled with water and the cover O-ring is clean, also be sure it is properly seated in the cover O-ring groove. Make sure strainer cover is locked firmly in position and lubricated with “Jack’s 327.”
– Make sure all suction and discharge valves are fully open and not blocked, that pool water level is at proper level, and that skimmer weir is not hung up or binded on skimmer wall.
– Block off to determine if pump will develop a vacuum. You should have 5″-6″ of vacuum at the strainer cover (Only your pool dealer can confirm this with a vacuum gauge). You may be able to check by removing the skimmer basket and holding your hand over the bottom port with skimmer full and pump running. If no suction is felt, check for line blockage
– If pump develops a vacuum, check for blocked suction line or dirty strainer basket, an air leak in the suction piping may be the cause.
– If pump does not develop a vacuum and pump has sufficient “priming water”:
1. Re-check strainer housing cover and all threaded connections for suction leaks. Check if all hose clamps are tight.
2. Check voltage to ensure that the motor is rotating at full RPM’s.
3. Open housing cover and check for clogging or obstruction in suction. Check impeller for debris.
4. Remove and replace shaft seal only if it is leaking.

Max. Pool Size (gallons) 12,000 Sand Required 50 lbs.

SKU: DSPSE3195 Categories: , ,

In Stock

Hayward Pro-Series Sand Filters Deliver A Combination Of Efficiency And Amazing Water Clarity

Take a swim in clear, clean water every time you jump into your above ground pool with the Hayward Pro Series Sand Filter System. This unique above ground pool filter system combines innovation and power to ensure your pool water is in impeccable condition all the time. These systems are quick to assemble and engineered to provide the maximum amount of flow with the minimal amount of energy usage, reducing your operational costs while offering the best possible results. Hayward is the number one name in the pool industry, and the Pro Series Sand Filter System for Above Ground Pools is no exception. You’ll notice superior water quality, extended filter cleaning cycles and no required backwashing. It’s simple to operate this fantastic filter system, it’s a great economic value and it’s crafted from ultra-strong, durable and reinforced thermos-plastic.
  • Best-in-class efficiency saves on operation and energy usage
  • Full flow technology ensures maximum flow rates and filtration
  • Requires very little maintenance and boasts a tough construction
  • Vari-Flo control valve features six options for selection of filter functionality
  • Weather and element-proof housing
  • Systems designed for fast assembly
  • Optional microprocessor pump timer is available
PUMP: • The above-ground industry's largest strainer basket for large debris collection with minimal maintenance. • Horizontal/vertical discharge feature -- simply converts from vertical to horizontal discharge orientation with the press of a button. • Quick disconnect intake and discharge pipe connection. • C-Clip Connector allows for easy disengagement of strainer housing in a matter of seconds for hassle-free maintenance. • Heavy-duty, high performance motor with integrated automatic thermal overload protector for years of operation. • High quality Noryl® impeller with wide openings to prevent clogging by leaves and debris. • Durable, corrosion-proof housing for years of dependable service and all-weather performance. • Heat-resistant, double-sized seal for long-lasting efficiency . • Energy-efficient, protected rear mounted switch. • Integral drain plug for easy winterization of pump. PUMP:
  • Motor Will NOT Start – Check For:
– Improper or loose wiring connections; open switches or relays; tripped circuit breakers, GFCI's, or blown fuses. – Manually check rotation of motor shaft for free movement and lack of obstruction. – If you have a timer, be certain it is working properly. Bypass it if necessary.
  • Motor Shuts OFF – Check For:
– Undersized wiring; loose connections; etc. – Low voltage at motor or power drop (frequently caused by undersized wiring or extension cord use). – Mechanical binding and electrical overloads. NOTE: Your Hayward pump motor is equipped with an "automatic thermal overload protector." The motor will automatically shut off if power supply drops before heat damage can build up causing windings to burn out. The "thermal overload protector" will allow the motor to automatically restart once the motor has cooled, provided the power source is again up to proper levels. It will continue to cut On/Off until the problem is corrected. Be sure to correct cause of overheating.
  • Motor Hums, But Does NOT Start – Check For:
– Centrifugal switch stuck in OPEN position. – Binding of motor shaft.
  • Pump Won't Prime:
– Make sure pump/strainer housing is filled with water and the cover O-ring is clean, also be sure it is properly seated in the cover O-ring groove. Make sure strainer cover is locked firmly in position and lubricated with "Jack's 327." – Make sure all suction and discharge valves are fully open and not blocked, that pool water level is at proper level, and that skimmer weir is not hung up or binded on skimmer wall. – Block off to determine if pump will develop a vacuum. You should have 5"-6" of vacuum at the strainer cover (Only your pool dealer can confirm this with a vacuum gauge). You may be able to check by removing the skimmer basket and holding your hand over the bottom port with skimmer full and pump running. If no suction is felt, check for line blockage – If pump develops a vacuum, check for blocked suction line or dirty strainer basket, an air leak in the suction piping may be the cause. – If pump does not develop a vacuum and pump has sufficient "priming water": 1. Re-check strainer housing cover and all threaded connections for suction leaks. Check if all hose clamps are tight. 2. Check voltage to ensure that the motor is rotating at full RPM's. 3. Open housing cover and check for clogging or obstruction in suction. Check impeller for debris. 4. Remove and replace shaft seal only if it is leaking. Max. Pool Size (gallons) 12,000 Sand Required 50 lbs.

Google Reviews

Eyez On Entertainment
Eyez On Entertainment
21:28 27 Jan 18
I ordered products for some of my own customers and they shipped it on time no hassle direct free shipping!
See All Reviews
0